Compact Controller
PER-DinX
- TMP96C265 (Toshiba TLCS900H-Serie)with 1MB flash and 512K static, battery backed-up* RAM
- 8 digital, optoisolated inputs partially one to HW-16bit-counter
- 8 digital outputs 24V/700mA short circuit protected, with watchdog-RESET
- 4 analog inputs 0...5V, 10 bit resolution
- 2 analog outputs 0...10V
- realtime clock/calendar
- RS232-interface for local peripherals
- I²C-interface for extension modules (RJ45)
- Programmierschnittstelle (ser.TTL) für Download und Monitor - Anschlussmodul DinXPROG setzt auf RS232 um.
- Wahlweise mit zweiter (isolierter) RS232-Schnittstelle für die Hostkommunikation oder mit BITBUS-Feldbusanschluss
- * optionally DinXA
DinX is an inexpensive and extensible microcontroller for switchboard mounting on DIN-rails. The powerful 16bit processor and the large memory allow applications that demand data storage (measurement data, service data), local pre-processing or host communication.
DinX is available in three configurations: The minimum configuration (without D/A, A/D only 5 V, no clock, RAM not battery backed-up), a standard configuration and one with either BITBUS-network extension or a second RS232-interface (isolated).
The networked version can be used as autonomous peripheral unit, for example to receive data over the RS232-interface from a measurement device or machine and then process the data in regard to its own digital and analog inputs. Locally the 24V and the analog outputs are used for controlling, while data is being condensed, stored and kept on call for the central computer.
The mCAT realtime operating system supports complex tasks by message as well as event initiated task processing. The digital and analog i/o are accessed by hardware independent i/o objects.
