Embedded Control
Embedded Control Modules
159.- € *
125 x 85 mm großes Prozessormodul mit ARM7 32-Bit-CPU (40MHz, 16-Bit Speicherbus), 512K RAM Gold-Cap-gepuffert, 2MB Flash-Eprom fest aufgelötet (mit mCAT2 Echtzeitkern, TCP/IP und UDP, 3 Web Server), 8K Konfigurations-EEPROM, 10/100MBit Ethernet, 1x RS232/485 schaltbar, 1x RS232. Echtzeituhr, I²C Temperatursensor, Matrix-Tastaturanschluss, Anschluss für 128x64 LCD-Grafikdisplay. Systembus auf 44-p. Stecker.
125.- € *
NEW: 5 x 5 cm (2x2") module with TLCS900H 16 bit microcontroller 25MHz. Features a wealth of internal peripherals like timers, stepper port, ADC, DMA, 2 DA´s plus 512K Li-battery backed-up RAM and 1MB 16 bit TSOP Flash EPROM with boot loader.
Large EEPROM and Z16C32 serial controller as with standard NET/900. Includes mCAT2
175.- € *
5 x 7.5 cm (2x3") module with TLCS900H 16 bit microcontroller 25MHz; much like NET/900H but with 1 Mbyte 16 bit wide RAM (two chips), 1 Mbyte Flash EPROM, real time clock and RAM battery back up. Includes mCAT2
Standard base boards for the above processor modules
50.62 € *
Eurocard sized (160x100mm) base board with DC/DC power supply (8..24V input), RS232 drivers for the serial ports of the TLCS900 and (not isolated) RS485 driver for the IUSC. Large breadboarding area for custome drivers and connectors.
264.85 € *
To test all the features of a NET/900 this base unit provides power supply from 230V (115V) mains, 2 RS232 drivers, isolated RS485 (BITBUS) port, 8 isol. inputs 24V, 4 of them to TI4..7, four isolated drivers 24V/0.2A, 2 changeover relays, SCR, SPI output to 7SEG4, RC5 IR remote keyboard input.
* all prices ex works (+VAT/MwSt inside Germany)


