Embedded Control
NET-900H
- TMP95C063 16 bit microcontroller 25 MHz, (TLCS900H family), with versatile peripherals::
- 4 analog inputs 10 bits
- 2 analog outputs 8 bits
- 2 serial ports UART/SPI
- 2 stepper-motor pattern ports
- 8 timers 8 bit
- 2 counter/timers 16 bit
- 4 µDMA-controllers
- watchdog
- 1 MByte Flash-EPROM with mCAT2 Real Time Kernel, 512 RAM
- 128x8 I²C EEPROM for configuration data, I²C bus externally available.
- Z16C32 IUSC with SDLC/HDLC
- Chip select, 8 addresses and data bus brought out for i/o extension on base board
- 53x53mm (~2x2 in.) module size.
- Two 40pin sockets mating standard header connectors on the base board, compatible with NET/900
Powerful universal processor core for "embedded control" applications. Usually plugged onto custom base boards with drivers, relays, connectors etc., that - by their low complexity nature - usually can be manufactured using standard bi-layer pcb technology. Combined with the pre-configured real time kernel this approach helps keeping time-to-market low.
NET/900H unites perfectly the essential hardware and software to control measuring equipment, machines, LCD terminals, climate control units, regulators etc. The many i/o functions, generous memory size and the modern real time kernel for C programming comply with all requirements even for demanding applications.
For the evaluation of the module ELZET80 offers a number of standard base boards (NET900NT, EVA900), but usually a custom board is used for the final application. Such custom boards can be made fast and at minimum cost as they usually require a standard two-layer pcb only with through-hole component placement.
