terminals

LCD-Terminals

PER LCD-TERM
tsm
  • RS232 terminal electronics for character LCD displays and keyboard encoder for all kinds of matrix keyboards up to 8x8 keys.
  • Built-in power supply for 12 to 30V DC operation.
  • Switchable 300mA @5V available for LED backlight.
  • EEPROM to store character codes and communication parameters.
  • Contrast voltage generation -2 to +5V.
  • Fits 2x24 LCD in width and mounting holes.
  • Supports mounting holes for other LCD modules as far as possible.
  • Screw terminal connector for power supply.
    AT compatible 9pin D plug.
  • Use LCDTERM also as keyboard encoder without LCD module.

 

 

LCDTERM is the low budget entry into alphanumeric user interface: Add a character LCD module and a simple matrix keyboard to make an industrial terminal that operates on a serial line. It even has its own power supply to work on any DC voltage between 12 and 30V although 5V operation is possible, too.

 

LCDTERM can be configured to operate with almost any LCD module:

1x16, 1x24, 1x32, 1x40,
2x16, 2x24, 2x32 and 2x40.


4x20 needs slightly different scrolling software. A separate software version is available for this display, although we recommend the use of LCDTERM20 that has exactly the size of a standard 4x20 module.