TSM...the modular rail mount system
TSM-32E24N
- 32 digital inputs 24V=
- Optocouplers for all inputs with 500Hz low pass filter and 12V switching threshold
- 3 terminals for each input: +24V, signal and ground
- Red LEDs for each input
- Monitoring of external 24V by LED and software (Bit 6 of ID- address)
TSM-32E24N is a general purpose digital input module for applications that require many inputs. Three terminals are available for each of the 32 inputs to immediately connect electronic initiators (PNP-type), simple switches or active units.
Operation of this module is very much like that of four TSM-8E24N modules but in one unit. As with TSM-8E24N, 24V= are applied to the module and then distributed to the 3-screw-terminals for all inputs. Also red LEDs are available to show the state of all inputs and 24V external voltage is monitored. All inputs are isolated from the TSM-Bus and processor supply, they are not, however, isolated against each other. In special cases (transducers with OC-outputs that have their grounds connected) specific inputs can be disconnected from the ground rail.
Technical data:
Module ID: 10H
Size: 181x126mm, 26p TSM-bus
Current consumption with all inputs active: 85mA at 6,3V
Connectors needed:
2x MVSTBR 2,5-9/ST-5,08,
1x MSTB2.5/9-ST-5,08
6x MVSTBR2,5-8/ST-5,08,
3x MSTB2.5/8-ST-5,08
