TSM-32E24N

TSM-32E24N

TSM-32E24N is a general purpose digital input module for applications that require many inputs. Three terminals are available for each of the 32 inputs to immediately connect electronic initiators (PNP-type), simple switches or active units.

  • 32 digital inputs 24V=
  • Optocouplers for all inputs with 500Hz low pass filter and 12V switching threshold
  • 3 terminals for each input: +24V, signal and ground
  • Red LEDs for each input
  • Monitoring of external 24V by LED and software (Bit 6 of ID- address)
  • Prices
  • Details
  • Installation
"TSM Module with 32 inputs, 24V"

prices on request

TSM-32E24N

Module as described

"Mating screw terminal plug set "

prices on request

TSM-32E24N<XSK

Mating screw terminal plug set

* all prices ex works (+VAT/MwSt inside Germany)

Operation of this module is very much like that of four TSM-8E24N modules but in one unit. As with TSM-8E24N, 24V= are applied to the module and then distributed to the 3-screw-terminals for all inputs. Also red LEDs are available to show the state of all inputs and 24V external voltage is monitored. All inputs are isolated from the TSM-Bus and processor supply, they are not, however, isolated against each other. In special cases (transducers with OC-outputs that have their grounds connected) specific inputs can be disconnected from the ground rail.

Technical data:

  • Module ID: 10H Size: 181x126mm, 26p TSM-bus
  • Current consumption with all inputs active: 85mA at 6,3V
  • Connectors needed: 2x MVSTBR 2,5-9/ST-5,08, 1x MSTB2.5/9-ST-5,08 6x MVSTBR2,5-8/ST-5,08, 3x MSTB2.5/8-ST-5,08

Installation manual TSM-32E24N